Cisco 7960 - Page 72

Chapter 3 Managing Cisco SIP IP Phones
Modifying the Phone’s SIP Settings
3-12
Cisco SIP IP Phone 7960 Administrator Guide
78-10497-02
–
dst_offset—(Optional) Offset from the phone’s time when DST is in
effect.
–
dst_start_month—(Optional) Month in which DST starts.
–
dst_start_day—(Optional) Day of the month on which DST begins.
–
dst_start_day_of_week—(Optional) Day of the week on which DST
begins.
–
dst_start_week_of_month—(Optional) Week of month in which DST
begins.
–
dst_start_time—(Optional) Time of day on which DST begins.
–
dst_stop_month—(Optional) Month in which DST ends.
–
dst_stop_day—(Optional) Day of the month on which DST ends.
–
dst_stop_day_of_week—(Optional) Day of the week on which DST
ends.
–
dst_stop_week_of_month—(Optional) Week of month in which DST
ends.
–
dst_stop_time—(Optional) Time of day on which DST ends.
–
dst_auto_adjust—(Optional) Whether or not DST is automatically
adjusted on the phones.
•
dnd_control—(Optional) Whether the Do Not Disturb feature is enabled or
disabled by default on the phone or whether the feature is permanently
enabled. When the feature is permanently enabled, a phone is a “call out”
phone only. When the Do Not Disturb feature is turned on, the phone will
block all calls placed to the phone and log those calls in the Missed Calls
directory. Valid values are:
–
0—The Do Not Disturb feature is off by default, but can be turn on and
off locally via the phone’s user interface.
–
1—The Do Not Disturb feature is on by default, but can be turned on and
off locally via the phone’s user interface.