Cisco 7961G Administration Guide

8-7
Cisco IP Phone Administration Guide for Cisco CallManager, Cisco IP Phone 7961G/7961G-GE and 7941G/7941G-GE
OL-6966-01
Chapter 8 Monitoring the Cisco IP Phone Remotely
Network Configuration
CallManager 1–5 Host names or IP addresses, in prioritized order, of the Cisco CallManager
servers with which the phone can register. An item can also show the IP
address of an SRST router that is capable of providing limited
Cisco CallManager functionality, if such a router is available.
For an available server, an item will show the Cisco CallManager server IP
address and one of the following states:
• Active—Cisco CallManager server from which the phone is currently
receiving call-processing services.
• Standby—Cisco CallManager server to which the phone switches if the
current server becomes unavailable.
• Blank—No current connection to this Cisco CallManager server.
An item may also include the Survivable Remote Site Telephony (SRST)
designation, which identifies an SRST router capable of providing
Cisco CallManager functionality with a limited feature set. This router
assumes control of call processing if all other Cisco CallManager servers
become unreachable. The SRST Cisco CallManager always appears last in
the list of servers, even if it is active. You configure the SRST router address
in the Device Pool section in Cisco CallManager.
Information URL URL of the help text that appears on the phone.
Directories URL URL of the server from which the phone obtains directory information.
Messages URL URL of the server from which the phone obtains message services.
Services URL URL of the server from which the phone obtains Cisco IP Phone services.
DHCP Enabled Indicates whether DHCP is being used by the phone.
DHCP Address
Released
Indicates the setting of the DHCP Address Released option on the phone’s
Network Configuration menu.
Alternate TFTP Indicates whether the phone is using an alternative TFTP server.
Forwarding Delay Indicates whether the internal switch begins forwarding packets between the
PC port and the switch port on the phone when the phone becomes active.
Idle URL URL that the phone displays when the phone has not been used for the time
specified by Idle URL Time and no menu is open.
Table 8-2 Network Configuration Area Items (continued)
Item Description

Cisco 7961G Specifications

General

Brand	Cisco
Model	7961G
Category	IP Phone
Language	English