Chapter 4 Configuring Settings on the Cisco IP Phone
Network Configuration Menu
4-6
Cisco IP Phone Administration Guide for Cisco CallManager, Cisco IP Phone 7961G/7961G-GE and 7941G/7941G-GE
OL-6966-01
Related Topics
• Displaying a Configuration Menu, page 4-2
• Unlocking and Locking Options, page 4-3
• Editing Values, page 4-4
• Network Configuration Menu, page 4-6
• Device Configuration Menu, page 4-15
Network Configuration Menu
The Network Configuration menu provides options for viewing and making a
variety of network settings. Table 4-2 describes these options and, where
applicable, explains how to change them.
IP settings If you do not use DHCP in your network, you can
make IP settings manually.
Domain Name
IP Address
Subnet Mask
Default Router 1-5
DNS Server 1-5
TFTP settings If you do not use DHCP to direct the phone to a
TFTP server, you must manually assign a TFTP
server. You can also assign an alternative TFTP
server to use instead of the one assigned by
DHCP.
TFTP Server 1
Alternate TFTP
TFTP Server 2
VLAN settings Allow you to change the administrative VLAN
used by the phone.
Admin. VLAN ID
Port settings Allow you to set the speed and duplex of the
network and access ports.
SW Port Configuration
PC Port Configuration
Table 4-1 Options Configurable from a Cisco IP Phone
Category Description
Network Configuration Menu
Option
To Next Page
Loading...
