Cisco 7961G Administration Guide

4-7
Cisco IP Phone Administration Guide for Cisco CallManager, Cisco IP Phone 7961G/7961G-GE and 7941G/7941G-GE
OL-6966-01
Chapter 4 Configuring Settings on the Cisco IP Phone
Network Configuration Menu
For information about how to access the Network Configuration menu, see the
“Displaying a Configuration Menu” section on page 4-2.
Before you can change an option on this menu, you must unlock options as
described in the “Unlocking and Locking Options” section on page 4-3. The Edit,
Yes, or No softkeys for changing network configuration options appear only if
options are unlocked.
For information about the keys you can use to edit options, see the “Editing
Values” section on page 4-4.
Table 4-2 Network Configuration Menu Options
Option Description To Change
DHCP Server IP address of the Dynamic Host
Configuration Protocol (DHCP)
server from which the phone obtains
its IP address.
Display only—cannot configure.
BOOTP Server Indicates whether the phone obtains
its configuration from a Bootstrap
Protocol (BootP) server instead of
from a DHCP server.
Display only—cannot configure.
MAC Address Unique Media Access Control
(MAC) address of the phone.
Display only—cannot configure.
Host Name Unique host name that the DHCP
server assigned to the phone.
Display only—cannot configure.
Domain Name Name of the Domain Name System
(DNS) domain in which the phone
resides.
1. Unlock network configuration options.
2. Set the DHCP Enabled option to No.
3. Scroll to the Domain Name option,
press the Edit softkey, and then enter a
new domain name.
4. Press the Validate softkey and then
press the Save softkey.

Cisco 7961G Specifications

General

Brand	Cisco
Model	7961G
Category	IP Phone
Language	English