Cisco 7961G Administration Guide

Chapter 4 Configuring Settings on the Cisco IP Phone
Network Configuration Menu
4-8
Cisco IP Phone Administration Guide for Cisco CallManager, Cisco IP Phone 7961G/7961G-GE and 7941G/7941G-GE
OL-6966-01
IP Address Internet Protocol (IP) address of the
phone.
If you assign an IP address with this
option, you must also assign a subnet
mask and default router. See the
Subnet Mask and Default Router
options in this table.
1. Unlock network configuration options.
2. Set the DHCP Enabled option to No.
3. Scroll to the IP Address option, press
the Edit softkey, and then enter a new
IP Address.
4. Press the Validate softkey and then
press the Save softkey.
Subnet Mask Subnet mask used by the phone.
1. Unlock network configuration options.
2. Set the DHCP Enabled option to No.
3. Scroll to the Subnet Mask option, press
the Edit softkey, and then enter a new
subnet mask.
4. Press the Validate softkey and then
press the Save softkey.
Table 4-2 Network Configuration Menu Options (continued)
Option Description To Change

Cisco 7961G Specifications

General

Brand	Cisco
Model	7961G
Category	IP Phone
Language	English