Cisco 7961G Administration Guide

4-9
Cisco IP Phone Administration Guide for Cisco CallManager, Cisco IP Phone 7961G/7961G-GE and 7941G/7941G-GE
OL-6966-01
Chapter 4 Configuring Settings on the Cisco IP Phone
Network Configuration Menu
TFTP Server 1 Primary Trivial File Transfer
Protocol (TFTP) server used by the
phone. By default this server is
CiscoCM1. If you are not using
DHCP in your network and you want
to change this default server, you
must use the TFTP Server 1 option.
If you set the Alternate TFTP option
to yes, you must enter a non-zero
value for the TFTP Server 1 option.
If neither the primary TFTP server
nor the backup TFTP server is listed
in the CTL file on the phone, you
must unlock the CTL file before you
can save changes to the TFTP Server
1 option. In this case, the phone will
delete the CTL file when you save
changes to the TFTP Server 1 option.
For information about the CTL file,
refer to the Cisco CallManager
Security Guide. For information
about unlocking the CTL file, see the
“Security Configuration Screen”
section on page 7-2.
1. Unlock the CTL file, if necessary.
2. If DHCP is enabled, set the Alternate
TFTP option to Yes.
3. Scroll to the TFTP Server 1 option,
press the Edit softkey, and then enter a
new TFTP server IP address.
4. Press the Validate softkey, and then
press the Save softkey.
Table 4-2 Network Configuration Menu Options (continued)
Option Description To Change

Cisco 7961G Specifications

General

Brand	Cisco
Model	7961G
Category	IP Phone
Language	English