Cisco 8800 Series Guide

DescriptionParameter
The external SIP port number.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<EXT_SIP_Port_1_
ua="na">5060</EXT_SIP_Port_1_>
• In the phone web page, enter a port number.
Allowed values:
Default: 5060
EXT SIP Port
The Cisco IP Phone authenticates the sender when it
receives a NOTIFY message with the following
requests:
• resync
• reboot
• report
• restart
• XML-service
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Auth_Resync-Reboot_1_
ua="na">No</Auth_Resync-Reboot_1_>
• In the phone web page, select Yes to enable the
feature.
Allowed values: Yes|No
Default: Yes
Auth Resync-Reboot
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
368
Cisco IP Phone Installation
Parameters for SIP Settings on Extensions

Cisco 8800 Series Specifications

General

Protocols	SIP, SCCP
Audio	Wideband audio
Connectivity	Gigabit Ethernet
Power	Power over Ethernet (PoE)
Bluetooth	Yes
USB	Yes
Codec Support	G.711, G.722, G.729, iLBC
Dimensions	Varies by model
Weight	Varies by model
Wi-Fi	Yes (varies by model)