DescriptionParameter
The SIP proxy can support a specific extension or
behavior when it receives the Proxy-Require header
from the user agent. If this field is configured and the
proxy does not support it, it responds with the
message, unsupported.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<SIP_Proxy-Require_1_
ua="na">header<SIP_Proxy-Require_1_>
• In the phone web interface, enter the appropriate
header in the field provided.
Default: Blank
SIP Proxy-Require
The Remote-Party-ID header to use instead of the
From header. Select Yes to enable.
Default: Yes
SIP Remote-Party-ID
Controls when the phone sends BYE to terminate stale
call legs upon completion of call transfers. Multiple
delay settings (Referor, Refer Target, Referee, and
Refer-To Target) are configured on this screen.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Referor_Bye_Delay_1_
ua="na">4</Referor_Bye_Delay_1_>
• In the phone web page, enter the appropriate
period of time in seconds.
Allowed values: An integer from 0 through 65535
Default: 4
Referor Bye Delay
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
369
Cisco IP Phone Installation
Parameters for SIP Settings on Extensions
To Next Page
Loading...
Need help?
General
