2-6
Cisco Aironet 1250 Series Access Point Hardware Installation Guide
OL-8247-03
Chapter 2 Installing the Access Point
Mounting Overview
Figure 2-2 illustrates the various mounting holes on the mounting plate.
Figure 2-2 Mounting Plate
Note The access point provides adequate fire resistance and low smoke-producing characteristics suitable for
operation in a building's environmental air space (such as above suspended ceilings) in accordance with
Section 300-22(C) of the National Electrical Code (NEC).
1 Mounting plate latch opening 6 Ceiling, wall, or network box mounting
holes
2 Access point mounting slots 7 Cable tie points
3 Suspended ceiling mounting holes 8 Grounding stud
4 Suspended ceiling mounting holes
(used for 90
0
orientation)
9 Suspended ceiling t-bar clip slot (for
Caddy mounting system)
5 Cable access openings (also on both ends of the
mounting plate)
230555
1
8
2
2
2
2
7
6
9
3
3
9
5
5
6
7
4
3
3
4
To Next Page
Loading...
