2-28
Cisco Aironet 1250 Series Access Point Hardware Installation Guide
OL-8247-03
Chapter 2 Installing the Access Point
Securing the Access Point
To secure the access point to the mounting plate using a padlock, follow these steps:
Step 1 Insert the padlock into the padlock hole on the mounting plate (see Figure 2-20).
Figure 2-20 Installing the Padlock
Step 2 Rotate the padlock to the lock position and then position the padlock to the side of the access point (see
Figure 2-21).
Figure 2-21 Position the Padlock for Locking
TO RELEASE:
PUSH LATCH
170363
TO RELEASE:
PUSH LATCH
170363
To Next Page
Loading...
