Cisco ASR 1002-HX

•
Be familiar with electronic circuitry and wiring practices.
•
Have experience working as electronic or electromechanical technicians.
•
Have experience in installing high-end networking equipment.
Certain procedures described in this guide require a certified electrician.Note
Document Organization
The following table describes the chapters and appendixes in this installation guide:
DescriptionChapter and Appendix
Provides an overview of the Cisco ASR 1001-HX Router
and Cisco ASR 1002-HX Router
Overview1
Provides an overview of the hardware components for the
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX
Router
Supported Hardware Components2
Provides site preparation guidelines for installing the Cisco
ASR 1001-HX Router and Cisco ASR 1002-HX Router
Preparing Your Site for Installation3
Provides information about the installation methods and
steps to install the Cisco ASR 1001-HX Router and Cisco
ASR 1002-HX Router
Installing the Router4
Provides basic system startup and initial configuration
information
Power Up and Initial Configuration5
Provides information about the Cisco ASR 1001-HX
Router and Cisco ASR 1002-HX Router licenses
License Verification6
Provides instructions for removing and replacing the
various FRUs in the Cisco ASR 1001-HX Router and Cisco
ASR 1002-HX Router
Removing and Replacing FRUs7
Provides router specifications for the Cisco ASR 1001-HX
Router and Cisco ASR 1002-HX Router
Technical SpecificationsA
Lists pinout specifications for the Cisco ASR 1001-HX
Router and Cisco ASR 1002-HX Router
Port Signals and PinoutsB
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
x
Preface
Document Organization