Cisco ASR 1002-HX

Example
The following EvalRTU license example displays the EvalRTU licenses used on the 10GE ports. A Permanent
license works similarly:
StoreIndex: 16 Feature: interface_10g Version: 1.0
License Type: EvalRightToUse
License State: Active, In Use
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 3 days
Period used: 3 hours 13 minutes
Transition date: Aug 16 2013 19:05:26
License Count: 0/0 (In-use/Violation)
License Priority: Low
...
StoreIndex: 16 Feature: interface_10g Version: 1.0
License Type: EvalRightToUse
License State: Active, In Use
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 3 days
Period used: 3 hours 13 minutes
Transition date: Aug 16 2013 19:05:26
License Count: 2/0 (In-use/Violation)
License Priority: Low
Table 17: show license all Command Output Description
DescriptionField Name
No ports in use for the evaluation license.License Count: 0/0 (In-use/Violation)
Two port pairs in use for the evaluation license (an
EULA was accepted for each prior to use).
License Count: 2/0 (In-use/Violation)
Licensing Scenarios for Cisco ASR 1002-HX Router
The following table provides all possible licensing scenarios for the Cisco ASR 1002-HX Router.
CommentsLicense
Usage
Slot 5
or
Slot 7
Slot 4
or
Slot 6
ScenarioNo.
—
No LicenseSHUTSHUTNo SFP is in any port1
10G LicenseNO_SHUTSHUT
10G LicenseSHUTNO_SHUT
10G LicenseNO_SHUTNO_SHUT
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
107
License Verification
Port Licensing for the Cisco ASR 1002-HX Router