Cisco ASR 1002-HX

Example
The following EvalRTU license example displays the EvalRTU licenses used on the 10GE and 1G ports. A
Permanent license works similarly:
Index 33 Feature: interface_10g
Period left: 7 weeks 5 days
Period Used: 5 days 6 hours
License Type: EvalRightToUse
License State: Active, Not in Use, EULA accepted
License Count: 0/0 (In-use/Violation)
License Priority: Low
Index 34 Feature: interface_1g
Period left: 7 weeks 5 days
Period Used: 5 days 15 hours
License Type: EvalRightToUse
License State: Active, Not in Use, EULA accepted
License Count: 0/0 (In-use/Violation)
License Priority: Low
Table 16: show license all Command Output Description
DescriptionField Name
No ports in use for the evaluation license.License Count: 0/0 (In-use/Violation)
Two port pairs in use for the evaluation license (an
EULA was accepted for each prior to use).
License Count: 2/0 (In-use/Violation)
Licensing Scenarios for Cisco ASR 1001-HX Router
The following table provides all possible licensing scenarios for the Cisco ASR 1001-HX Router. It also
provides information about what you need to do to change from 1G SFP to 10G SFP+ and vice versa; or
transition from 1G SFP or 10G SFP+ to "No License".
CommentsLicense
Usage
Slot 5
or
Slot 7
Slot 4
or
Slot 6
ScenarioNo.
—
No LicenseSHUTSHUTNo SFP is in any port1
10G LicenseNO_SHUTSHUT
10G LicenseSHUTNO_SHUT
10G LicenseNO_SHUTNO_SHUT
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
103
License Verification
Port Licensing for the Cisco ASR 1001-HX Router