Cisco ASR 1002-HX

MaximumMinimumEnvironmental Characteristic
6,000 feet (1829 meters)
–500 feet (–152.4 meters)
Altitude, operating: over allowable
temperature range (0 to 50 degrees
C)
50,000 feet (15240 meters)
–1000 feet (–304.8 meters)
Altitude, nonoperating: over
allowable temperature range
158° F (70° C)
–13° F (–25° C)
Thermal shock nonoperating with
change over time of 3 minutes
122° F (50° C)32° F (0° C)Thermal Shock - Operating at 2.5
degree C per minute
Physical Characteristics
Be familiar with the physical characteristics of the Cisco ASR 1001-HX Router and Cisco ASR 1002-HX
Router to assist you in placing the system at a proper location.
For information regarding rack widths supported for the router, see the following sections:Note
•
General Rack-Selection Guidelines, on page 41
•
Guidelines for 23-in. (Telco) Racks, on page 42
The following table shows the weight and dimensions of the Cisco ASR 1001-HX Router and Cisco ASR
1002-HX Router:
Table 8: Physical Characteristics of the Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router
Cisco ASR 1002-HX RouterCisco ASR 1001-HX RouterCharacteristic
3.5 in. (88.9 mm)—2RU; rack-mount per
EIA RS-310
1.72 in. (43.69 mm)—1RU; rack-mount
per EIA RS-310
Height
17.3 in. (439.42 mm)17.3 in. (439.42 mm)Width
22.0 in. (558.8 mm)
Depth includes card handles,
cable-management brackets, and
power-supply handles
21.78 in. (553.2 mm)
Depth includes card handles,
cable-management brackets, and
power-supply handles
Depth
34 lb (15.42 kg) fully loaded23 lb (10.43 kg) fully loadedWeight
The following list describes additional characteristics:
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
36
Preparing Your Site for Installation
Site Selection Guidelines