Cisco ASR 1002-HX

The following figure shows the Cisco ASR 1001-HX Router AC power supply.
Figure 16: ASR1000X-AC-750W AC Power Supply Used in the Cisco ASR 1001-HX Router
FAIL and OK LEDs3AC power connector1
Retaining latchHandle2
The following figure shows the Cisco ASR 1002-HX Router AC power supply.
Figure 17: ASR1000X-AC-750W AC Power Supply Used in the Cisco ASR 1002-HX Router
FAIL and OK LEDs3AC power connector1
Retaining latchHandle2
DC Power Supply
The ASR1000X-DC-950W input connector is a two-wire connector with connection polarity from left to right
(when facing the unit) of positive (+) negative (–).
The power supply has a handle to be used for insertion and extraction. The module must be supported with
one hand because of its length.
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
22
Supported Hardware Components
DC Power Supply