Cisco ASR 1002-HX User Manual

Configuring a higher-level license automatically enables the lower-level licenses as Right to Use (RTU)
if the corresponding permanent licenses are not installed yet. For example, configuring 16-25g on the
Cisco ASR 1002-HX Router automatically enables 8g and 8-16g as RTU.
Note
For more information about the software-activated performance upgrade license, see the Software Activation
Configuration Guide.
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
110
License Verification
Configuring the Crypto Throughput Level

Cisco ASR 1002-HX Specifications

General

Form Factor	Rack-mountable
Redundancy	Yes
Power Supply	Dual, hot-swappable
Memory	16 GB DRAM
Storage	200 GB SSD
SPA Interface Processor (SIP) Slots	1
Operating Temperature	32 to 104°F (0 to 40°C)
Route Processor	RP2
Embedded Services Processor (ESP)	ESP-40
Rack Units	2