Cisco ASR 1002-HX User Manual

• Operating expense reduction—Cisco UDIs provide accurate and detailed network inventory information;
identifying each Cisco product in a network element through a standard interface. Cisco operating
systems can view and use this data, allowing you to automate your electronic inventory.
• Consistency across product layers—The UDIs are embedded in the hardware products and cannot be
overwritten. Operating and management systems discover UDIs through standard interfaces and display
UDIs in standard outputs. Standard interfaces include the IETF standard ENTITY-MIB.
show diag chassis eeprom detail Command
The show diag chassis eeprom command displays the PID, VID, PCB serial number, hardware revision, and
other such information.
The following is sample output from the show diag chassis eeprom command:
Router# show diag chassis eeprom
MIDPLANE EEPROM data:
Product Identifier (PID) : ASR1002-HX
Version Identifier (VID) : V00
PCB Serial Number : JAE1931098U
Top Assy. Part Number : 68-5448-02
Hardware Revision : 0.3
Asset ID :
CLEI Code : SAMPL00XYZ
Common Language Equipment Identification (CLEI) code is a ten-digit character code that identifies a
specific product. A CLEI code is applied to each part within a Cisco ASR1002-HX Router as they are
programmed in manufacturing for shipment to customers.
Note
show license udi Command
The show license udi command displays UDI information.
The following is sample output from the show license udi command:
Router# show license udi
SlotID PID SN UDI
--------------------------------------------------------------------------------
* ASR1002-HX JAE1931098U ASR1002-HX:JAE1931098U
For complete information on the product identification standard, see http://www.cisco.com/go/udi/.Note
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
13
Overview
Unique Device Identifier

Cisco ASR 1002-HX Specifications

General

Brand	Cisco
Model	ASR 1002-HX
Category	Network Router
Language	English