Cisco ASR 907 User Manual

SlotPart NumberInterface ModulesRSP Module
1-port OC48/ STM-16 or 4-port
OC-12/OC-3 / STM-1/STM-4 + 12-Port
T1/E1 + 4-Port T3/E3 CEM Interface
Module
3, 7, 11
3
4, 8, 12
4
5, 9, 13, 15
5
To enable this IM on slot 0 or
slot 1, do the following and
reload the router:
Router# configure t
Router(config)# license
feature service-offload
enable
Note
A900-IMA1Z8S-CXMSCombo 8-Port SFP GE and 1-Port 10GE
With CEM/iMSG 20G Interface Module
1
IM supports only one port of 100G with RSP3 as QSFP28 on Port 0 in both slots 7 and 8.
2
Six IM slots are supported with various combinations but only five IM slots are functional at a time.
3
These slots are supported on 10G or 20G mode.
4
These slots are supported on 10G or 20G mode, only if the adjacent odd slots are empty.
5
These slots are supported on 10G mode.
Cisco ASR 907 Router Hardware Installation Guide
11
Cisco ASR 907 Router Overview
Supported Interface Modules

Cisco ASR 907 Specifications

General

Brand	Cisco
Model	ASR 907
Category	Network Router
Language	English