Cisco ASR1006 - ASR 1006 Modular Expansion Base User Manual

Software Upgrade Process
ISSU Upgrade for Redundant Platforms
44
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Package: rpios-adventerprisek9, version: unknown, status: inactive
File: unknown, on: SIP1/3
Built: 2008-09-24_03.52, by: mcpre
File SHA1 checksum: unknown
Package: rpios-adventerprisek9, version: unknown, status: inactive
File: unknown, on: SIP2
Built: 2008-09-24_03.52, by: mcpre
File SHA1 checksum: unknown
Package: rpios-adventerprisek9, version: unknown, status: inactive
File: unknown, on: SIP2/0
Built: 2008-09-24_03.52, by: mcpre
File SHA1 checksum: unknown
Package: rpios-adventerprisek9, version: unknown, status: inactive
File: unknown, on: SIP2/1
Built: 2008-09-24_03.52, by: mcpre
File SHA1 checksum: unknown
Package: rpios-adventerprisek9, version: unknown, status: inactive
File: unknown, on: SIP2/2
Built: 2008-09-24_03.52, by: mcpre
File SHA1 checksum: unknown
Package: rpios-adventerprisek9, version: unknown, status: inactive
File: unknown, on: SIP2/3
Built: 2008-09-24_03.52, by: mcpre
File SHA1 checksum: unknown
Router# r
edundancy force-switchover
Proceed with switchover to standby RP? [confirm]
Manual Swact = enabled
*Sep 25 19:38:33.562: %SYS-5-SWITCHOVER: Switchover requested by Exec. Reason: redundancy
force-swi
tchover
Router# r
equest platform software package clean
Cleaning up unnecessary package files
No path specified, will use booted path bootflash:packages.conf
Cleaning bootflash:
Scanning boot directory for packages ... done.
Preparing packages list to delete ...
asr1000rp1-espbase.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg
File is in use, will not delete.
asr1000rp1-espbase.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1.pkg
File is in use, will not delete.
asr1000rp
1-rpaccess.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1.pkg
File is in use, will not delete.
asr1000rp1-rpbase.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1.pkg
File is in use, will not delete.
asr1000rp
1-rpcontrol.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1.pkg
File is in use, will not delete.
asr1000rp
1-rpios-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_
0100_1.pkg
File is in use, will not delete.
asr1000rp1-sipbase.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1.pkg
File is in use, will not delete.
asr1000rp1-sipspa.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1.pkg
File is in use, will not delete.

Cisco ASR1006 - ASR 1006 Modular Expansion Base Specifications

General

Rack Units	6U
Form Factor	Rack-mountable
Operating Temperature	32 to 104°F (0 to 40°C)
Product Type	Router
Slots	6
Redundancy	Redundant Power Supply Supported
Maximum Throughput	100 Gbps
Dimensions	17.5" Width
Weight	Approximately 130 lbs (59 kg)
Interfaces/Ports	Varies by installed modules
Memory	4 GB
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Relative Humidity	5% to 95% (noncondensing)
Compliance	CE, UL