Cisco ASR1006 - ASR 1006 Modular Expansion Base User Manual

Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Configuring and Accessing the Web User
Interface
The Cisco ASR 1000 Series Routers introduce a web user interface that expands on the functionality of
web user interfaces available in other Cisco routers.
This chapter is about this web user interface and covers the following topics:
• Web User Interface Overview, page 1
• Configuring the Router for Web User Interface Access, page 5
• Authentication and the Web User Interface, page 7
• Domain Name System and the Web User Interface, page 7
• Clocks and the Web User Interface, page 7
• Accessing the Web User Interface, page 8
• Using Auto Refresh, page 9
• Web User Interface Tips and Tricks, page 10
Web User Interface Overview
This section covers the following topics:
• Web User Interface General Overview, page 1
• Legacy Web User Interface Overview, page 2
• Graphics-Based Web User Interface Overview, page 3
• Persistent Web User Interface Transport Maps Overview, page 4
Web User Interface General Overview
The web user interface is available on Cisco ASR 1000 Series Routers starting in Cisco IOS XE
Release 2.1.1. The web user interface is not available in Cisco IOS XE Release 2.1.0.

Cisco ASR1006 - ASR 1006 Modular Expansion Base Specifications

General

Rack Units	6U
Form Factor	Rack-mountable
Operating Temperature	32 to 104°F (0 to 40°C)
Product Type	Router
Slots	6
Redundancy	Redundant Power Supply Supported
Maximum Throughput	100 Gbps
Dimensions	17.5" Width
Weight	Approximately 130 lbs (59 kg)
Interfaces/Ports	Varies by installed modules
Memory	4 GB
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Relative Humidity	5% to 95% (noncondensing)
Compliance	CE, UL