Cisco ASR1006 - ASR 1006 Modular Expansion Base User Manual

Configuring and Accessing the Web User Interface
Web User Interface Overview
4
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
See Figure 6 for an example of the graphics-based web user interface home page.
Figure 6 Graphics-Based Web User Interface Home Page
Persistent Web User Interface Transport Maps Overview
To enable the graphics-based web user interface, a persistent web user interface transport map must be
configured. The persistent web user interface transport map, when successfully configured and applied
to the router, defines how the router handles incoming web user interface requests. In the persistent web
user interface transport map, users define whether the graphics-based web user interface can be accessed
through HTTP, HTTPS, or both protocols. Only one persistent web user interface transport map can be
applied to a Cisco ASR 1000 Series Router at a time.

Cisco ASR1006 - ASR 1006 Modular Expansion Base Specifications

General

Rack Units	6U
Form Factor	Rack-mountable
Operating Temperature	32 to 104°F (0 to 40°C)
Product Type	Router
Slots	6
Redundancy	Redundant Power Supply Supported
Maximum Throughput	100 Gbps
Dimensions	17.5" Width
Weight	Approximately 130 lbs (59 kg)
Interfaces/Ports	Varies by installed modules
Memory	4 GB
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Relative Humidity	5% to 95% (noncondensing)
Compliance	CE, UL