Configuring Call Home
Displaying Call Home Configuration Information
34
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
DETAILED STEPS
What To Do Next
To receive an email from Cisco Systems and follow the instructions to complete the device registration
in the Smart Call Home web application:
• Launch the Smart Call Home web application at the following URL:
https://tools.cisco.com/sch/
• Accept the Legal Agreement.
• Confirm device registration for Call Home devices with pending registration.
For more information about using the Smart Call Home web application, see Sm
art Call Home User
Guide. This user guide also includes configuration examples for sending Smart Call Home messages
directly from your device or through a transport gateway (TG) aggregation point. You can use a TG
aggregation point in cases requiring support for multiple devices or in cases where security requirements
mandate that your devices must not be connected directly to the Internet.
Displaying Call Home Configuration Information
You can use variations of the show call-home command to display Call Home configuration
information.
To display the configured Call Home information, use one or more of the following commands:
SUMMARY STEPS
1. show call-home
2. show call-home detail
3. show call-home alert-group
4. show call-home mail-server status
5. show call-home profile {all | name}
6. show call-home statistics
Command or Action Purpose
Step 1
call-home send alert-group inventory profile
CiscoTAC-1
Example:
Router# call-home send alert-group inventory
profile CiscoTAC-1
Sends an inventory alert group message to the CiscoTAC-1
destination profile.
To Next Page
Need help?
General
