Cisco ASR1006 - ASR 1006 Modular Expansion Base User Manual

Using Cisco IOS XE Software
Finding Support Information for Platforms and Cisco Software Images
15
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Using the Software Advisor
To see if a feature is supported by a Cisco IOS XE release, to locate the software document for that
feature, or to check the minimum software requirements of Cisco IOS XE software with the hardware
installed on your router, Cisco maintains the Software Advisor tool on Cisco.com at
http://www.cisco.com/cgi-bin/Support/CompNav/Index.pl.
You must be a registered user on Cisco.com to access this tool.
Using the Software Release Notes
Cisco IOS XE software releases include release notes that provide the following information:
• Platform support information
• Memory recommendations
• New feature information
• Open and resolved severity 1 and 2 caveats for all platforms
Release notes are intended to be release-specific for
the most current release, and the information
provided in these documents may not be cumulative in providing information about features that first
appeared in previous releases. Refer to Cisco Feature Navigator for cumulative feature information.

Cisco ASR1006 - ASR 1006 Modular Expansion Base Specifications

General

Rack Units	6U
Form Factor	Rack-mountable
Operating Temperature	32 to 104°F (0 to 40°C)
Product Type	Router
Slots	6
Redundancy	Redundant Power Supply Supported
Maximum Throughput	100 Gbps
Dimensions	17.5" Width
Weight	Approximately 130 lbs (59 kg)
Interfaces/Ports	Varies by installed modules
Memory	4 GB
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Relative Humidity	5% to 95% (noncondensing)
Compliance	CE, UL