Cisco ASR1006 - ASR 1006 Modular Expansion Base User Manual

Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Monitoring and Maintaining Multilink Frame
Relay
The Cisco Frame Relay implementation currently supports routing on IP, DECnet, AppleTalk, XNS,
Novell IPX, CLNS, Banyan VINES, and transparent bridging. This guide describes how to monitor and
maintain the Multilink Frame Relay feature for the Cisco ASR 1000 Series Routers.
Finding Feature Information in This Module
Your software release might not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release. To find information
about the features documented in this module, and to see a list of the releases in which each feature is
supported, see the “Feature Information for Monitoring and Maintaining Multilink Frame Relay” section on
page 4.
Use Cisco Feature Navigator to find information about platform support and Cisco software image
support. T
o access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on
Cisco.com is not required.
Contents
It includes the following sections:
• Feature Overview, page 2
• Configuring Multilink Frame Relay, page 2
• Monitoring and Maintaining Frame Relay and Multilink Frame Relay, page 2

Cisco ASR1006 - ASR 1006 Modular Expansion Base Specifications

General

Brand	Cisco
Model	ASR1006 - ASR 1006 Modular Expansion Base
Category	Network Router
Language	English