Cisco ASR1006 - ASR 1006 Modular Expansion Base User Manual

Configuring Call Home
How to Configure Call Home
23
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)# call-home
Router(cfg-call-home)# contact-ema
il-addr username@example.com
Router(cfg-call-home)# phone-numbe
r +1-222-333-4444
Router(cfg-call-home)# street-addr
ess “1234 Any Street, Any city, Any state, 12345”
Router(cfg-call-home)# customer-id
Customer1234
Router(cfg-call-home)# site-id Sit
e1ManhattanNY
Router(cfg-call-home)# contract-id
Company1234
Router(cfg-call-home)# exit
Configuring the Number of Call Home Messages Sent Per Minute
The Call Home feature defaults to a maximum of 20 messages per minute. If you want to change that
value, complete the following steps:
SUMMARY STEPS
1. configure terminal
2. call-home
3. rate-limit number
DETAILED STEPS
Enabling and Disabling Call Home
To enable or disable the Call Home feature, complete the following steps:
SUMMARY STEPS
1. configure terminal
2. service call-home
3. no service call-home
Command or Action Purpose
Step 1
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 2
call-home
Example:
Router(config)# call-home
Enters call home configuration mode.
Step 3
rate-limit number
Example:
Router(cfg-call-home)# rate-limit 40
Specifies a limit on the number of messages sent per
minute. Range 1 to 60. The default is 20.

Cisco ASR1006 - ASR 1006 Modular Expansion Base Specifications

General

Brand	Cisco
Model	ASR1006 - ASR 1006 Modular Expansion Base
Category	Network Router
Language	English