Cisco ASR1006 - ASR 1006 Modular Expansion Base User Manual

Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Using Cisco IOS XE Software
This chapter provides information to prepare you to configure the Cisco ASR 100Series Routers:
• Accessing the CLI Using a Router Console, page 1
• Using the Auxiliary Port, page 4
• Using Keyboard Shortcuts, page 5
• Using the History Buffer to Recall Commands, page 5
• Understanding the Command Mode, page 6
• Understanding the Diagnostic Mode, page 7
• Getting Help, page 8
• Using the no and default Forms of Commands, page 11
• Saving Configuration Changes, page 12
• Managing Configuration Files, page 12
• Filtering the Output of the show and more Commands, page 13
• Powering Off a Router, page 14
• Finding Support Information for Platforms and Cisco Software Images, page 14
Accessing the CLI Using a Router Console
The following sections describe how to access the command-line interface (CLI) using a
directly-connected console or by using Telnet or a modem to obtain a remote console:
• Accessing the CLI Using a Directly-Connected Console, page 2
• Accessing the CLI from a Remote Console Using Telnet, page 3
• Accessing the CLI from a Remote Console Using a Modem, page 4

Cisco ASR1006 - ASR 1006 Modular Expansion Base Specifications

General

Rack Units	6U
Form Factor	Rack-mountable
Operating Temperature	32 to 104°F (0 to 40°C)
Product Type	Router
Slots	6
Redundancy	Redundant Power Supply Supported
Maximum Throughput	100 Gbps
Dimensions	17.5" Width
Weight	Approximately 130 lbs (59 kg)
Interfaces/Ports	Varies by installed modules
Memory	4 GB
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Relative Humidity	5% to 95% (noncondensing)
Compliance	CE, UL