Cisco ASR1006 - ASR 1006 Modular Expansion Base User Manual

Software Upgrade Process
ISSU Upgrade for Redundant Platforms
46
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Deleting file
bootflash:asr1000rp1-sipbase.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg
... done.
Deleting file
bootflash
:asr1000rp1-sipspa.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg
... done.
Deleting file bootflash:packages.conf.00- ... done.
Deleting file bootflash:packages.conf.01- ... done.
Deleting file bootflash:packages.conf.02- ... done.
Deleting file bootflash:packages.conf.03- ... done.
Deleting file bootflash:packages.conf.04- ... done.
SUCCESS: Files deleted.
Using ISSU to Upgrade SubPackages on a Cisco ASR 1006 Router or ASR 1013 Router (request platform command set)
This procedure can only be performed if the current ASR 1006 router or ASR 1013 router has two active
RPs and both RPs are running subpackages.
To perform an ISSU upgrade using subpackages on a Cisco ASR 1006 router or ASR 1013 router with
a du
al RP setup using the request platform command set, follow the following instructions.
SUMMARY STEPS
1. show version
show version active-rp in
stalled
show version stan
dby-rp installed
dir f
ilesystem:<directory>
show platform
2. mkdir URL-to-directory-name
3. ip tftp source-interface gigabitethernet slot/port
4. copy tftp: URL-to-target-location
5. request platform software package expand file URL-to-consolidated-package
6. dir URL-to-consolidated-package
7. copy file-system:asr1000rp1-espbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy fi
le-system:asr1000rp1-rpaccess.version.pkg URL-to-directory-of-sub-packages-active-RP
copy fi
le-system:asr1000rp1-rpbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy fi
le-system:asr1000rp1-rpcontrol.version.pkg URL-to-directory-of-sub-packages-active-RP
copy fi
le-system:asr1000rp1-rpios.version.pkg URL-to-directory-of-sub-packages-active-RP
copy fi
le-system:asr1000rp1-sipbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy fi
le-system:asr1000rp1-sipspa.version.pkg URL-to-directory-of-sub-packages-active-RP
8. copy file-system:asr1000rp1-espbase.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy fi
le-system:asr1000rp1-rpaccess.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy fi
le-system:asr1000rp1-rpbase.version.pkg URL-to-directory-of-sub-packages-standby-RP
copy fi
le-system:asr1000rp1-rpcontrol.version.pkg
URL-to-directory-of-sub-packages-standby-RP
copy fi
le-system:asr1000rp1-rpios.version.pkg URL-to-directory-of-sub-packages-standby-RP

Cisco ASR1006 - ASR 1006 Modular Expansion Base Specifications

General

Rack Units	6U
Form Factor	Rack-mountable
Operating Temperature	32 to 104°F (0 to 40°C)
Product Type	Router
Slots	6
Redundancy	Redundant Power Supply Supported
Maximum Throughput	100 Gbps
Dimensions	17.5" Width
Weight	Approximately 130 lbs (59 kg)
Interfaces/Ports	Varies by installed modules
Memory	4 GB
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Relative Humidity	5% to 95% (noncondensing)
Compliance	CE, UL