Configuring Cisco Right-To-Use License
Information About Cisco Right-To-Use License
4
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
How to Activate an Evaluation License
To activate an evaluation license for the technology package perform the steps detailed in this section.
For more information on activating the feature licenses, see Configuration Examples for Right-To-Use
Supported Software Licenses, page 5.
Note Evaluation Right-To-Use licenses automatically changes to Right-To-Use licenses after the evaluation
period of 60 days.
Evaluation licenses are activated using the license boot level {adventerprise | advipservices |ipbase}
command.
SUMMARY STEPS
1. enable
2. configure terminal
3. license boot level {adventerprise | advipservices |ipbase}
4. exit
5. copy running-config startup-config
6. reload
DETAILED STEPS
SLASR1-IPB Cisco ASR 1000 IP BASE License
FLS-ASR1001-5G Throughput performance upgrade from 2.5G to 5G
license for A
SR1001
Yes Yes
Table 1 Evaluation and Right-To-Use Licenses (continued)
License name License Description
Evaluation
License
Right-To-
Use
License
Command or Action Purpose
Step 1
enable
Example:
Router>enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router#configure terminal
Enters global configuration mode.
To Next Page
Loading...
Need help?
General
