A-1
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-11
APPENDIX
A
Unsupported Commands
The Cisco ASR 1000 Series Routers contain a series of commands with the platform keyword that either
produce no output or produce output that is not useful for customer purposes. Although some commands
with the platform keyword produce output that is useful for customer purposes, and are therefore
documented in the Cisco IOS XE command references, the vast majority of these commands are not
useful for customer purposes and are therefore considered unsupported.
Because these commands are considered
unsupported, you will not find any further Cisco documentation
for any of these commands.
Following is the list of unsupported commands for the Cisco ASR 1000 Series Routers:
• clear platform hardware cpp
• clear platform software access-list
• clear platform software adjacency
• clear platform software cce
• clear platform software cef
• clear platform software cman
• clear platform software dpidb
• clear platform software ess
• clear platform software icmp
• clear platform software infrastructure
• clear platform software inspect
• clear platform software mlp
• clear platform software mpls
• clear platform software multicast
• clear platform software nat
• clear platform software nbar
• clear platform software netflow
• clear platform software pam
• clear platform software qos
• clear platform software route-map
• clear platform software shell
To Next Page
Loading...
Need help?
General
