Cisco ASR1006 - ASR 1006 Modular Expansion Base User Manual

Configuring Call Home
How To Configure Call Home to Support the Smart Call Home Service
30
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
DETAILED STEPS
Command or Action Purpose
Step 1
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 2
call-home
Example:
Router(config)# call-home
Enters call home configuration mode.
Step 3
profile CiscoTAC-1
Example:
Router(config-call-home)# profile CiscoTAC-1
Enters call home destination profile configuration mode for
the CiscoTAC-1 destination profile.
Step 4
destination transport-method http
Example:
Router(cfg-call-home-profile)# destination
transport-method http
(Required only if using HTTPS) Configures the message
transport method for http.
Step 5
active
Example:
Router(cfg-call-home-profile)# active
Enables the destination profile.
Step 6
exit
Example:
Router(cfg-call-home-profile)# exit
Exits call home destination profile configuration mode and
returns to call home configuration mode.
Step 7
contact-email-addr email-address
Example:
Router(cfg-call-home)# contact-email-addr
username@example.com
Assigns the customer’s e-mail address. Enter up to 200
characters in e-mail address format with no spaces.
Step 8
exit
Example:
Router(cfg-call-home)# exit
Exits call home configuration mode and returns to global
configuration mode.
Step 9
service call-home
Example:
Router(config)# service call-home
Enables the Call Home feature.

Cisco ASR1006 - ASR 1006 Modular Expansion Base Specifications

General

Rack Units	6U
Form Factor	Rack-mountable
Operating Temperature	32 to 104°F (0 to 40°C)
Product Type	Router
Slots	6
Redundancy	Redundant Power Supply Supported
Maximum Throughput	100 Gbps
Dimensions	17.5" Width
Weight	Approximately 130 lbs (59 kg)
Interfaces/Ports	Varies by installed modules
Memory	4 GB
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Relative Humidity	5% to 95% (noncondensing)
Compliance	CE, UL