Configuring Call Home
Alert Group Trigger Events and Commands
40
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Alert Group Trigger Events and Commands
Call Home trigger events are grouped into alert groups, with each alert group assigned CLI commands
to execute when an event occurs. The CLI command output is included in the transmitted message.
Table 3 lists the trigger events included in
each alert group, including the severity level of each event and
the executed CLI commands for the alert group.
Ta b l e 3 Call Home Alert Groups, Events, and Actions
Alert Group
Call Home
T
rigger Event Syslog Event Severity
Description and CLI Commands
Executed
Configuration — — — User-generated request for
conf
iguration. (Sent to TAC.)
CLI commands executed:
show platform
show inventory
show running-config all
show startup-config
show version
Diagnostic — — — CLI commands executed:
show platform
show diagnostic result slot x detail
show version
show inventory
show buffers
show logging
show diagnostic result slot all
show diagnostic events slot all
— Error Counter
Mo
nitoring Test
failure count
exceeds
threshold
%ASR1000_RP_DIAG_TEST-4-
ERR_CNTR_HM
_TEST_FAIL
4 ERROR_COUNTER_WARNING:
Slot number Error counter exceeds
threshold, system operation
continue.
— Error Counter
Mo
nitoring Test
failure count
exceeds
threshold
%ASR1000_RP_DIAG_TEST-4-
ERR_CNTR_HM
_TEST_DATA
4 ERROR_COUNTER_DATA:
ID:number IN:number PO:number
RE:number RM:number
DV:number EG:number CF:number
TF:number
Environmental — — — Events related to power, fan, and
e
nvironment sensing elements, such
as temperature alarms. (Sent to
TAC.)
CLI commands executed:
show platform
show environment
show inventory
show logging
To Next Page
Loading...
Need help?
General
