Console Port, Telnet, and SSH Handling
Viewing Console Port, SSH, and Telnet Handling Configurations
11
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Router(config-tmap)# rsa keypair-name sshkeys
Router(config-tmap)# authentication-retries 1
Router(config-tmap)# banner diagnostic X
Enter TEXT message. End with the character 'X'.
--Welcome to Diagnostic Mode--
X
Router(config-tmap)#banner wait X
Enter TEXT message. End with the character 'X'.
--Waiting for vty line--
X
Router(config-tmap)# time-out 30
Router(config-tmap)# transport interface gigabitethernet 0
Router(config-tmap)# exit
Router(config)# transport type persistent ssh input sshhandler
Viewing Console Port, SSH, and Telnet Handling Configurations
Use the show transport-map [all | name transport-map-name | type [console | persistent [ssh |
telnet]]] EXEC or privileged EXEC command to view the transport map configurations.
In the following example, a console port, persistent SSH, and persistent Telnet transport are configured
o
n the router and various forms of the show transport-map command are entered to illustrate the
various ways the show transport-map command can be entered to gather transport map configuration
information.
Router# show transport-map all
Transport Map:
Name: consolehandler
Type: Console Transport
Connection:
Wait option: Wait Allow Interruptable
Wait banner:
Waiting for the IOS CLI
bshell banner:
Welcome to Diagnostic Mode
Transport Map:
Name: sshhandler
Type: Persistent SSH Transport
Interface:
GigabitEthernet0
Connection:
Wait option: Wait Allow Interruptable
Wait banner:
Waiting for IOS prompt
Bshell banner:
Welcome to Diagnostic Mode
SSH:
To Next Page
Loading...
Need help?
General
