Cisco ASR1006 - ASR 1006 Modular Expansion Base User Manual

Network Synchronization Support
Configuring Network Synchronization
16
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Troubleshooting the Network Synchronization Configuration
Note Before you troubleshoot, ensure that all the network synchronization configurations are complete.
Table 4 p
rovides information about troubleshooting scenarios that you may encounter while configuring
network synchronization.
Ta b l e 4 Troubleshooting Scenarios
Problem Solution
Clock selection
• Verify that there are no alarms on the interfaces. Use the show
network-clock synchronization detail command to check this.
• Ensure that the nonrevertive configurations are in place.
Incorrect QL values Ensure that there is no framing mismatch with the SSM option.

Cisco ASR1006 - ASR 1006 Modular Expansion Base Specifications

General

Rack Units	6U
Form Factor	Rack-mountable
Operating Temperature	32 to 104°F (0 to 40°C)
Product Type	Router
Slots	6
Redundancy	Redundant Power Supply Supported
Maximum Throughput	100 Gbps
Dimensions	17.5" Width
Weight	Approximately 130 lbs (59 kg)
Interfaces/Ports	Varies by installed modules
Memory	4 GB
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Relative Humidity	5% to 95% (noncondensing)
Compliance	CE, UL