Cisco ASR1006 - ASR 1006 Modular Expansion Base User Manual

Configuring Call Home
Message Contents
50
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
NAME: "SPA subslot 0/2", DESCR: "8-port OC3/STM1 POS Shared Port Adapter"
PID: SPA-8XOC3-POS , VID: V01, SN: JAE1236TSW0
NAME: "subslot 0/2 transceiver 0", DESCR: "OC3 SR-1/STM1 MM"
PID: SFP-OC3-MM , VID: A , SN: OCP12231628
NAME: "module 1", DESCR: "Cisco ASR1000 SPA Interface Processor 10"
PID: MCP-CC , VID: V00, SN: JAB1104062X
NAME: "SPA subslot 1/3", DESCR: "4-port OC3/STM1 POS Shared Port Adapter"
PID: SPA-4XOC3-POS , VID: V01, SN: JAB085202QU
NAME: "subslot 1/3 transceiver 0", DESCR: "OC3 SR-1/STM1 MM"
PID: SFP-OC3-MM , VID: A , SN: OCP12310174
NAME: "module 2", DESCR: "Cisco ASR1000 SPA Interface Processor 10"
PID: ASR1000-SIP10 , VID: V00, SN: JAB113701L9
NAME: "SPA subslot 2/3", DESCR: "1-port OC12/STM4 POS Shared Port Adapter"
PID: SPA-1XOC12-POS , VID: V01, SN: JAE1236U41L
NAME: "subslot 2/3 transceiver 0", DESCR: "OC12 SR-1/STM4 MM"
PID: SFP-OC12-MM , VID: A , SN: OCP10100281
NAME: "module R0", DESCR: "Cisco ASR1000 Route Processor 1"
PID: ASR1000-RP1 , VID: V00, SN: JAB11110181
NAME: "module R1", DESCR: "Cisco ASR1000 Route Processor 1"
PID: ASR1000-RP1 , VID: V00, SN: JAB1111016K
NAME: "module F0", DESCR: "Cisco ASR1000 Embedded Services Processor, 10Gbps"
PID: ASR1000-ESP10 , VID: V00, SN: JAB111801ZX
NAME: "module F1", DESCR: "Cisco ASR1000 Embedded Services Processor, 10Gbps"
PID: ASR1000-ESP10 , VID: V00, SN: JAB111101AP
NAME: "Power Supply Module 0", DESCR: "Cisco ASR1006 AC Power Supply"
PID: TBD000000000000000, VID: +^A , SN: ART1114Q00F
NAME: "Fan Module 1", DESCR: "Cisco ASR1006 Fan Module"
PID: TBD000000000000000, VID: +^A , SN: ART1115P00D
Sample Syslog Alert Notification in XML Format
The following example shows a Syslog alert notification in XML format:
<?xml version="1.0" encoding="UTF-8"?>
<soap-env:Envelope xmlns:soap-env="http://www.w3.org/2003/05/soap-envelope">
<soap-env:Header>
<aml-session:Session xmlns:aml-session="http://www.cisco.com/2004/01/aml-session"
soap-env:
mustUnderstand="true"
soap-env:role="http://www.w3.org/2003/05/soap-envelope/role/next">
<aml-session:To>http://tools.cisco.com/neddce/services/DDCEService</aml-session:To>
<aml-session:Path>
<aml-session:Via>http://www.cisco.com/appliance/uri</aml-session:Via>
</aml-session:Path>
<aml-session:From>http://www.cisco.com/appliance/uri</aml-session:From>
<aml-session:MessageId>M0:FOX105101DH:CEC1E73E</aml-session:MessageId>
</aml-session:Session>
</soap-env:Header>
<soap-env:Body>
<aml-block:Block xmlns:aml-block="http://www.cisco.com/2004/01/aml-block">

Cisco ASR1006 - ASR 1006 Modular Expansion Base Specifications

General

Rack Units	6U
Form Factor	Rack-mountable
Operating Temperature	32 to 104°F (0 to 40°C)
Product Type	Router
Slots	6
Redundancy	Redundant Power Supply Supported
Maximum Throughput	100 Gbps
Dimensions	17.5" Width
Weight	Approximately 130 lbs (59 kg)
Interfaces/Ports	Varies by installed modules
Memory	4 GB
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Relative Humidity	5% to 95% (noncondensing)
Compliance	CE, UL