Configuring Call Home
Message Contents
51
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
<aml-block:Header>
<aml-block:Type>http://www.cisco.com/2005/05/callhome/syslog</aml-block:Type>
<aml-block:CreationDate>2009-12-03 12:29:02 GMT+05:00</aml-block:CreationDate>
<aml-block:Builder>
<aml-block:Name>ASR1000</aml-block:Name>
<aml-block:Version>2.0</aml-block:Version>
</aml-block:Builder>
<aml-block:BlockGroup>
<aml-block:GroupId>G1:FOX105101DH:CEC1E73E</aml-block:GroupId>
<aml-block:Number>0</aml-block:Number>
<aml-block:IsLast>true</aml-block:IsLast>
<aml-block:IsPrimary>true</aml-block:IsPrimary>
<aml-block:WaitForPrimary>false</aml-block:WaitForPrimary>
</aml-block:BlockGroup>
<aml-block:Severity>2</aml-block:Severity>
</aml-block:Header>
<aml-block:Content>
<ch:CallHome xmlns:ch="http://www.cisco.com/2005/05/callhome" version="1.0">
<ch:EventTime>2009-12-03 12:29:01 GMT+05:00</ch:EventTime>
<ch:MessageDescription>*Dec 3 12:29:01.017 IST: %CLEAR-5-COUNTERS: Clear counter on all
interface
s by console</ch:MessageDescription>
<ch:Event>
<ch:Type>syslog</ch:Type>
<ch:SubType></ch:SubType>
<ch:Brand>Cisco Systems</ch:Brand>
<ch:Series>ASR1000 Series Routers</ch:Series>
</ch:Event>
<ch:CustomerData>
<ch:UserData>
<ch:Email>username@example.com</ch:Email>
</ch:UserData>
<ch:ContractData>
<ch:CustomerId>username@example.com</ch:CustomerId>
<ch:SiteId>example.com</ch:SiteId>
<ch:ContractId>123456789</ch:ContractId>
<ch:DeviceId>ASR1006@C@FOX105101DH</ch:DeviceId>
</ch:ContractData>
<ch:SystemInfo>
<ch:Name>mcp-6ru-3</ch:Name>
<ch:Contact></ch:Contact>
<ch:ContactEmail>username@example.com</ch:ContactEmail>
<ch:ContactPhoneNumber>+14085551234</ch:ContactPhoneNumber>
<ch:StreetAddress>1234 Any Street Any City Any State 12345</ch:StreetAddress>
</ch:SystemInfo>
<ch:CCOID></ch:CCOID>
</ch:CustomerData>
<ch:Device>
<rme:Chassis xmlns:rme="http://www.cisco.com/rme/4.0">
<rme:Model>ASR1006</rme:Model>
<rme:HardwareVersion>2.1</rme:HardwareVersion>
<rme:SerialNumber>FOX105101DH</rme:SerialNumber>
<rme:AdditionalInformation>
<rme:AD name="PartNumber" value="68-2584-05" />
<rme:AD name="SoftwareVersion" value="" />
<rme:AD name="SystemObjectId" value="1.3.6.1.4.1.9.1.925" />
<rme:AD name="SystemDescription" value="Cisco IOS Software, IOS-XE Software
(PPC_LINU
X_IOSD-ADVENTERPRISEK9-M), Experimental Version 12.2(20091118:075558)
[v122_33_xnf_asr_rls6_throttle-mcp_dev_rls6 102]
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 18-Nov-09 01:14 by " />
</rme:AdditionalInformation>
</rme:Chassis>
</ch:Device>
</ch:CallHome>
To Next Page
Loading...
Need help?
General
