Software Upgrade Process
Upgrade Process With Service Impact for Nonredundant Platforms
79
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
0/1 SPA-2XT3/E3 ok 00:51:24
R0 ASR1000-RP1 ok 00:52:34
R0/0
ok, active 00:52:34
R0/1 ok, standby 00:51:00
F0 ASR1000-ESP10 ok, active 00:52:34
P0 ASR1004-PWR-AC ok 00:51:57
P1 ASR1004-PWR-AC ok 00:51:57
Using SubPackages for Software Upgrade on a Cisco ASR 1001 Router
This section provides instructions on using software upgrade for Cisco ASR 1001 Router running
subpackages.
These instructions assume two IOS processes are active on
the RP and that the router is already running
using subpackages.
SUMMARY STEPS
1. show version
show version instal
led
dir f
ilesystem:<directory>
show platform
show redundancy-states
2. redundancy
mode sso
3. mkdir URL-to-directory-name
4. ip tftp source-interface gigabitethernet slot/port
5. copy tftp: URL-to-target-location
6. request platform software package expand file URL-to-consolidated-package
7. dir URL-to-consolidated-package
8. copy file-system:asr1001-espbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy f
ile-system:asr1001-rpaccess.version.pkg URL-to-directory-of-sub-packages-active-RP
copy f
ile-system:asr1001-rpbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy f
ile-system:asr1001-rpcontrol.version.pkg URL-to-directory-of-sub-packages-active-RP
copy f
ile-system:asr1001-rpios.version.pkg URL-to-directory-of-sub-packages-active-RP
copy f
ile-system:asr1001-sipbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy f
ile-system:asr1001-sipspa.version.pkg URL-to-directory-of-sub-packages-active-RP
9. issu loadversion rp 0 file file-system:asr1001-{rpaccess,rpios,rpcontrol}*version-string*.pkg
bay standby-bay force
10. issu commitversion
11. redundancy force-switchover
12. show platform
To Next Page
Loading...
Need help?
General
