Cisco ASR1006 - ASR 1006 Modular Expansion Base User Manual

Configuring MPLS Layer 2 VPNs
Configuring Frame Relay DLCI-to-ATM AAL5SNAP Bridged Interworking
12
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
16. pseudowire-class [pw-class-name]
17. encapsulation mpls
18. interworking ethernet
19. exit
20. interface loopback loopback-interface-number
21. ip address ip-address mask
22. exit
23. interface serial slot/subslot/port:timeslot
24. no ip address
25. encapsulation frame-relay
26. frame-relay intf-type dce
27. frame-relay interface-dlci dlci switched
28. exit
29. interface GigabitEthernet slot/subslot/port
30. ip address ip-address mask
31. negotiation auto
32. mpls ip
33. exit
34. connect connection-name interface dlci l2transport
35. xconnect peer-ip-address vc-id encapsulation mpls pw-class pw-class-name
36. exit

Cisco ASR1006 - ASR 1006 Modular Expansion Base Specifications

General

Rack Units	6U
Form Factor	Rack-mountable
Operating Temperature	32 to 104°F (0 to 40°C)
Product Type	Router
Slots	6
Redundancy	Redundant Power Supply Supported
Maximum Throughput	100 Gbps
Dimensions	17.5" Width
Weight	Approximately 130 lbs (59 kg)
Interfaces/Ports	Varies by installed modules
Memory	4 GB
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Relative Humidity	5% to 95% (noncondensing)
Compliance	CE, UL