Cisco ASR1006 - ASR 1006 Modular Expansion Base User Manual

Console Port, Telnet, and SSH Handling
Viewing Console Port, SSH, and Telnet Handling Configurations
15
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
The current access-policies
Method : telnet
Rule : wait with interrupt
Shell banner:
Welcome to Diagnostic Mode
Wait banner :
Waiting for IOS Process
Method : ssh
Rule : wait
Shell banner:
Wait banner :
Method : console
Rule : wait with interrupt
Shell banner:
Wait banner :
Router# c
onfigure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)# transport-map type
persistent ssh sshhandler
Router(config-tmap)# connection wa
it allow interruptible
Router(config-tmap)# banner diagno
stic X
Enter TEXT message. End with the character 'X'.
Welcome to Diag Mode
X
Router(config-tmap)# banner wait X
Enter TEXT message. End with the character 'X'.
Waiting for IOS
X
Router(config-tmap)# rsa keypair-n
ame sshkeys
Router(config-tmap)# transport int
erface gigabitethernet 0
Router(config-tmap)# exit
Router(config)# transport type per
sistent ssh input sshhandler
Router(config)# exit
Router# s
how platform software configuration access policy
The current access-policies
Method : telnet
Rule : wait with interrupt
Shell banner:
Welcome to Diagnostic Mode
Wait banner :
Waiting for IOS process
Method : ssh
Rule : wait with interrupt
Shell banner:
Welcome to Diag Mode
Wait banner :
Waiting for IOS
Method : console

Cisco ASR1006 - ASR 1006 Modular Expansion Base Specifications

General

Rack Units	6U
Form Factor	Rack-mountable
Operating Temperature	32 to 104°F (0 to 40°C)
Product Type	Router
Slots	6
Redundancy	Redundant Power Supply Supported
Maximum Throughput	100 Gbps
Dimensions	17.5" Width
Weight	Approximately 130 lbs (59 kg)
Interfaces/Ports	Varies by installed modules
Memory	4 GB
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Relative Humidity	5% to 95% (noncondensing)
Compliance	CE, UL