EasyManuals Logo

Cisco ASR1006 - ASR 1006 Modular Expansion Base User Manual

Cisco ASR1006 - ASR 1006 Modular Expansion Base
462 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background image
Software Upgrade Process
ISSU Upgrade for Redundant Platforms
9
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Examples
The following example shows how to perfrom consolidated package upgrade in a dual route processor
configuration:
Router(config)# ip tftp source-interface gigabitethernet 0
Router# c
opy tftp bootflash:
Address or name of remote host []? 172.17.16.81
Source filename []?
/auto/tft
p-users/user/asr1000rp1-adventerprisek9.02.01.01.122-33.XNA1.bin
Destination filename [asr1000rp1-adventerprisek9.02.01.01.122-33.XNA1.bin]?
Accessing
tftp://17
2.17.16.81//auto/tftp-users/user/asr1000rp1-adventerprisek9.02.01.01.122-33.XNA1.
bin...
Loading /auto/tftp-users/user/asr1000rp1-adventerprisek9.02.01.01.122-33.XNA1.bin from
172.17.16
.81 (via GigabitEthernet0):
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!
[OK - 209227980 bytes]
209227980 bytes copied in 329.215 secs (635536 bytes/sec)
Router# c
opy bootflash:asr1000rp1-adventerprisek9.02.01.01.122-33.XNA1.bin stby-bootflash:
Destination filename [asr1000rp1-adventerprisek9.02.01.01.122-33.XNA1.bin]?
Step 21
show version
show version active-RP running
show version active-RP provisioned
show platform
show running-configuration
(Optional) Enter the show version, show platform,
or show runnning-configuration commands to
confirm that the upgrade completed successfully, as
follows:
show version—Confirm that the correct
software version is running on your router and
that the RP was booted from the correct file.
show running-configuration—Confirm that
the booting configuration, in particular the boot
system statements, are correct.
Tip Use the show running-config | include boot
command to display only the boot statements
from the show running-configuration
output.
show platform— Confirm that both RP0 and
RP1 are correctly running as active and standby.
Step 22
hw-module slot RP-slot reload
Example:
Router# hw-module slot R0 reload
Reload the new software on the Standby RP.
Command or Action Purpose

Table of Contents

Other manuals for Cisco ASR1006 - ASR 1006 Modular Expansion Base

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR1006 - ASR 1006 Modular Expansion Base and is the answer not in the manual?

Cisco ASR1006 - ASR 1006 Modular Expansion Base Specifications

General IconGeneral
Rack Units6U
Form FactorRack-mountable
Operating Temperature32 to 104°F (0 to 40°C)
Product TypeRouter
Slots6
RedundancyRedundant Power Supply Supported
Maximum Throughput100 Gbps
Dimensions17.5" Width
WeightApproximately 130 lbs (59 kg)
Interfaces/PortsVaries by installed modules
Memory4 GB
Storage Temperature-40°F to 158°F (-40°C to 70°C)
Relative Humidity5% to 95% (noncondensing)
ComplianceCE, UL

Related product manuals