Cisco Catalyst 4500 Series System Message Guide

1-3
Catalyst 4500 Series Switch Cisco IOS System Message Guide
OL-13091-01
Chapter 1 System Message Format
Message Structure
SEVERITY Level
The severity level is a single-digit code from 0 to 7 that reflects the severity of the condition. The lower
the number, the more serious the situation. Table 1-2 lists the message severity levels.
PORTFANOUTASIC8X1000HW Port fan-out ASIC 8x1000 hardware
PORTFANOUTASIC8X100MAN Port fan-out ASIC 8x100 management
QOS Quality of Service
REDUNDANCY Redundant supervisor
S2W Calendar
SPD SPD
SFF8472 Floating-point subsystem (SFF8472)
SPANTREE Spanning Tree Protocol
SPANTREE_VLAN_SW Spanning Tree VLAN switch management
STORM_CONTROL Broadcast storm control
STORE Memory
SUPERVISOR Supervisor
SWITCH-QOS-TB Switch QoS management
SW_DAI Dynamic ARP inspection
SW-VLAN Switch VLAN management
SWITCHINGENGINEMAN Switching engine management
SWITCHMANAGER Switch management
SWNETFLOWMAN Software NetFlow management
SYSMAN System management
TRANSCIEVER TRANSCEIVER subsystem
UFAST UplinkFast
VQPCLIENT VLAN query protocol client
WATCHDOG Watchdog timer
Table 1-1 Facility Codes (continued)
Code Facility
Table 1-2 Message Severity Levels
Severity Level Description
0 Emergency—System is unusable
1 Alert—Immediate action required
2 Critical—Critical condition
3 Error—Error condition
4 Warning—Warning condition

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E