Cisco FLUIDMESH FM4200 Mobi User Manual

7. By default, the RADIUS inactivity Expiration (s) period is 28 800
seconds (8 hours). Do not change the expiration period unless
there is a specific need to do so.
8. Choose the data authentication method by clicking the
Authentication Method drop-down and clicking the correct
option. Available options are:
• MSCHAPV2 (Microsoft Challenge-Handshake
Authentication Protocol V2)
• MD5 (Hash function producing a 128-bit hash value)
• GTC (Generic Token Card)
• TTLS (Tunneled Transport Layer Security)
• PEAP (Protected Extensible Authentication Protocol)
9. Enter the personal username for access to the RADIUS server in
the Username field.
10. Enter the personal password for access to the RADIUS server in
the Password field. To read the password as it is typed, check
the show check-box.
11. Available Inner Authentication Methods depend on which
Authentication Method has been chosen. If applicable, choose an
inner authentication method by clicking the Inner Authentication
Method drop-down and clicking the correct option. Available
options are shown in the following table:
Table 5. Available inner authentication methods (per
authentication methods)
Authentication
Method
Available Inner Authentication Methods
MSCHAPV2 None
MD5 None
GTC None
TTLS • PAP (Password Authentication Protocol)
• CHAP (Challenge-Handshake
Authentication Protocol)
• MSCHAP (Microsoft Challenge-Handshake
Authentication Protocol)
• MSCHAPV2
• MD5
• GTC
PEAP • MSCHAPV2
• MD5
• GTC
12. Save the RADIUS settings by clicking the Save button.
Alternatively, clear the settings by clicking the Reset button.
Cisco Ultra-Reliable Wireless
Backhaul FM4200 Mobi
© 2020 Cisco and/or its affiliates. All rights reserved. Page 114 of 177

Cisco FLUIDMESH FM4200 Mobi Specifications

General

Brand	Cisco
Model	FLUIDMESH FM4200 Mobi
Category	Transceiver
Language	English