Cisco FLUIDMESH FM4200 Mobi User Manual

Figure 29. Advanced Tools window (Bandwidth test tool)
3. Click the Run button to the right of the IP address field.
• The bandwidth test result will be shown below the test
controls.
Using the Path MTU discovery tool
The Path MTU discovery tool tests the size of the maximum transmission
unit (in other words, the largest protocol data unit that can be
communicated in a single network layer transaction).
To use the Path MTU discovery tool, do the following steps:
1. Determine what wireless link is to be tested between the
Fluidmesh unit and another unit in the wireless network. Get the
IP address of the other unit.
2. Enter the IP address of the second unit in the Path MTU
discovery field (Figure 30 (page 91)).
Cisco Ultra-Reliable Wireless
Backhaul FM4200 Mobi
© 2020 Cisco and/or its affiliates. All rights reserved. Page 90 of 177

Cisco FLUIDMESH FM4200 Mobi Specifications

General

Brand	Cisco
Model	FLUIDMESH FM4200 Mobi
Category	Transceiver
Language	English