Cisco FLUIDMESH FM4200 Mobi User Manual

Figure 31. Configurator (Advanced Radio Settings menu)
Using the FluidMAX Management Setting
The FluidMAX™ Management controls are used to set the unit's
FluidMAX™ operating mode.
Note that the FluidMAX™ Management controls are only available under
the following conditions:
• If the unit's firmware is equipped with the FluidMAX engine.
• If the unit is currently being operated as part of a point-to-multipoint
network topology.
To use the FluidMAX Management menu, do the following steps:
1. Click the Radio Mode drop-down menu.
2. Choose the correct FluidMAX operating mode from the following
list of options:
• AUTO: The FluidMAX engine is enabled, and the unit role
is set automatically. Depending on various factors, the unit
will automatically choose whether to transmit using the
Cisco Ultra-Reliable Wireless
Backhaul FM4200 Mobi
© 2020 Cisco and/or its affiliates. All rights reserved. Page 92 of 177

Cisco FLUIDMESH FM4200 Mobi Specifications

General

Brand	Cisco
Model	FLUIDMESH FM4200 Mobi
Category	Transceiver
Language	English