Figure 23. Configurator GUI (Wireless Radio dialog)
2. Enter a defined network passphrase in the Shared Passphrase
field.
IMPORTANT
If a shared passphrase is defined, the same
passphrase must be used for all Fluidmesh units in
the same network.
The shared passphrase can be composed of any
ASCII characters except the following: '`"\$=
3. Specify the country in which the unit is installed by selecting the
correct option from the Country drop-down menu.
CAUTION
Different countries frequently have differing
telecommunications regulations. If the Country listing
is not set correctly, the unit may violate national
telecommunications legislation.
4. Specify the unit's operating frequency by clicking the correct
option in the Frequency (MHz) drop-down.
CAUTION
Make sure that the chosen country listing matches
the country in which the unit is installed before
changing the Frequency (MHz) value.
• You can change the frequency of each radio link in order to
minimize interference with other wireless networks
Cisco Ultra-Reliable Wireless
Backhaul FM4200 Mobi
© 2020 Cisco and/or its affiliates. All rights reserved. Page 64 of 177
To Next Page
Loading...
Need help?
General
