Cisco FM4200 - Switching between Offline and Online Modes

7.3. Switching between offline and online modes
The
Configurator interface may not be in the needed mode when you log
in. To switch between Offline and Online modes, do the steps that follow:
1. Log in to the Configurator interface as shown in “Accessing
the Cisco FM4200 Fiber for device configuration” (page 57).
• The Configurator landing page will be shown (Figure 21
(page 68)).
Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved. Page 67 of 189