Cisco IE-3000-8TC Message Guide

2-22
Cisco IE 3000 Switch System Message Guide
OL-13020-01
Chapter 2 Message and Recovery Procedures
EXPRESS_SETUP Messages
EXPRESS_SETUP Messages
This section contains messages for the Express Setup feature.
Error Message EXPRESS_SETUP-3-UNABLE_TO_RESET_CONFIG: [chars].
Explanation The system is unable to reset the configuration. [chars] is a text string that explains why
the reset failed. For example,
error renaming config file, error removing config file, or
error removing private config file.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the
gathered information. For more information about these online tools and about contacting Cisco, see the
“Error Message Traceback Reports” section on page 1-4.
Error Message EXPRESS_SETUP-6-CONFIG_IS_RESET: [chars].
Explanation The configuration is reset. [chars] is a text message that clarifies the reset event, such
as
The configuration is reset and the system will now reboot.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the
gathered information. For more information about these online tools and about contacting Cisco, see the
“Error Message Traceback Reports” section on page 1-4.
Error Message EXPRESS_SETUP-6-MODE_ENTERED.
Explanation The Express Setup mode is active.
Recommended Action No action is required.
Error Message EXPRESS_SETUP-6-MODE_EXITED.
Explanation The Express Setup mode is no longer active.
Recommended Action No action is required.

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes