Cisco IE-3000-8TC Message Guide

2-72
Cisco IE 3000 Switch System Message Guide
OL-13020-01
Chapter 2 Message and Recovery Procedures
TCAMMGR Messages
TCAMMGR Messages
This section contains the ternary content-addressable memory manager (TCAMMGR) messages.
Error Message TCAMMGR-3-GROW_ERROR: cam region [dec] can not grow.
Explanation The specified CAM region is configured as a static region with a fixed number of
entries, and a caller requested to add more CAM entries. [dec] is the CAM region.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the
gathered information. For more information about these online tools and about contacting Cisco, see the
“Error Message Traceback Reports” section on page 1-4.
Error Message TCAMMGR-3-HANDLE_ERROR: cam handle [hex] is invalid.
Explanation The CAM handle used by the caller is not valid. [hex] is the handle value.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the
gathered information. For more information about these online tools and about contacting Cisco, see the
“Error Message Traceback Reports” section on page 1-4.
Error Message TCAMMGR-3-INDEX_ERROR: cam value/mask index [dec] is invalid.
Explanation The CAM index used by the caller is not valid. [dec] is the index value.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the
gathered information. For more information about these online tools and about contacting Cisco, see the
“Error Message Traceback Reports” section on page 1-4.
Error Message TCAMMGR-3-MOVE_ERROR: cam entry move from index [int] to index [int]
failed.
Explanation Moving a CAM entry from one index to another failed. [int] is the index value.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the
gathered information. For more information about these online tools and about contacting Cisco, see the
“Error Message Traceback Reports” section on page 1-4.

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes