vi
Cisco IE 3000 Switch System Message Guide
OL-13020-01
Preface
Related Publications
Interactive examples use these conventions:
• Terminal sessions and system displays are in screen font.
• Information you enter is in boldface screen font.
• Nonprinting characters, such as passwords or tabs, are in angle brackets (< >).
Notes use this convention and symbol:
Note Means reader take note. Notes contain helpful suggestions or references to materials not in this manual.
Related Publications
These documents provide complete information about the switch and are available from this Cisco.com
site:
http://www.cisco.com/en/US/products/ps9703/tsd_products_support_series_home.html
Note Before installing, configuring, or upgrading the switch, see these documents:
• For initial configuration information, see the “Using Express Setup” chapter in the getting started
guide or the “Configuring the Switch with the CLI-Based Setup Program” appendix in the hardware
installation guide.
• For device manager requirements, see the “System Requirements” section in the release notes on
Cisco.com.
• For Network Assistant requirements, see the Getting Started with Cisco Network Assistant on
Cisco.com.
• For cluster requirements, see the Release Notes for Cisco Network Assistant on Cisco.com.
• For upgrade information, see the “Downloading Software” section in the release notes.
See these documents for other information about the switch:
• Release Notes for the Cisco IE 3000 Switch
• Cisco IE 3000 Switch Software Configuration Guide
• Cisco IE 3000 Switch Command Reference
• Cisco IE 3000 Switch Hardware Installation Guide
• Cisco IE 3000 Switch Getting Started Guide
• Regulatory Compliance and Safety Information for the Cisco IE 3000 Switch
• Device manager online help (available on the switch)
• Getting Started with Cisco Network Assistant
• Release Notes for Cisco Network Assistant
• Cisco Small Form-Factor Pluggable Modules Installation Notes
• For information about the Network Admission Control (NAC) features, see the Network Admission
Control Software Configuration Guide