Cisco IE-3000-8TC Message Guide

2-2
Cisco IE 3000 Switch System Message Guide
OL-13020-01
Chapter 2 Message and Recovery Procedures
ACLMGR Messages
• PLATFORM_IPv6 Message, page 2-35
• PLATFORM_PM Messages, page 2-35
• PLATFORM_VLAN Messages, page 2-36
• PM Messages, page 2-37
• PORT_SECURITY Messages, page 2-45
• QOSMGR Messages, page 2-47
• RMON Messages, page 2-52
• SPAN Messages, page 2-52
• SPANTREE Messages, page 2-53
• SPANTREE_FAST Messages, page 2-61
• SPANTREE_VLAN_SW Messages, page 2-61
• STORM_CONTROL Messages, page 2-61
• SUPERVISOR Messages, page 2-62
• SUPQ Messages, page 2-62
• SW_MACAUTH Messages, page 2-64
• SW_VLAN Messages, page 2-65
• SWITCH_QOS_TB Messages, page 2-71
• TCAMMGR Messages, page 2-72
• UDLD Messages, page 2-73
• UFAST_MCAST_SW Messages, page 2-75
ACLMGR Messages
This section contains the access control list (ACL) manager messages. Most messages in this section are
the result of a switch memory shortage, which includes hardware memory and label space but not CPU
memory. Both kinds of memory shortages are described.
Error Message ACLMGR-2-NOMAP: Cannot create ACL Manager data structures for VLAN Map
[chars].
Explanation The ACL manager could not allocate the data structures needed to describe a VLAN
map in a form that can be loaded into hardware. This error is most likely caused by lack of free
memory. [chars] is the VLAN map name.
Recommended Action Reduce other system activity to ease memory demands.

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes