Cisco Line Card 4500 E-Series User Manual

A-11
Catalyst 4500 E-Series Switches Installation Guide
OL-13972-02
Appendix A Power Supply Specifications
1400 W AC-Input Power Supply
Figure A-3 1400 W AC-Input Power Supply Features
1400 W AC-Input Power Supply Specifications
Table A-7 lists the specifications for the 1400 W AC-input power supply.
1 AC-input receptacle 3 Captive installation screws
2 Power on/off switch
231375
1
2
3
Ta b l e A-7 1400 W AC-Input Power Supply Specifications
Item Specification
AC-input type Autoranging input with power factor corrector
Note Power factor correction is a standard feature on all Catalyst 4500
E-series AC-input power supplies. PFC reduces the reactive
component in the source AC current allowing higher power
factors (typically 99 percent or better) and lower harmonic
current components.
AC-input voltage • Low-line (120 VAC nominal)—85 VAC (min) to 132 VAC ( m a x )
• High-line (230 VAC nominal)—170 VAC (min) to 264 VAC (max)
AC-input current • 16 A @ 120 VAC
• 7 A @ 240 VAC
AC-input frequency 50/60 Hz (nominal) (±3 Hz for full range)

Cisco Line Card 4500 E-Series Specifications

General

Brand	Cisco
Model	Line Card 4500 E-Series
Category	Switch
Language	English